LogoBitVision App Docs
LogoBitVision App Docs
Homepage

IP Camera Quick Start

Step-by-step guide to network configuration, ping verification, and web login for BitVision IP cameras.

Please read this manual carefully and keep it properly before using our network camera products. Related tools and documents of products, please download from www.herospeed.net.

Thank you for using our products, please read this manual carefully before trying.

This manual is applicable to network series products. This manual may contain information that is technically inaccurate, inconsistent in the product's function and operation, or a typographical error. Our company will update the content in the manual according to the enhancement of product features. Updated content will be added in the new version of this manual without further notice. If there is a manual description of the product that does not match the physical, in order to prevail in kind.

Statement

Thank you for using our products, please read this manual carefully before trying.

Safety Precautions

  • This equipment should be installed in a well-ventilated environment. Please keep proper space with the ground during installation. It is good for the heat dissipation of the machine. Do not block the ventilation door of the equipment, away from the heat source and avoid high temperature environment.
  • This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product.
  • Power must be under safety certification. Its output voltage, current, voltage polarity and operating temperature must comply with the power requirements of this equipment.
  • When using this equipment in thunder and lightning conditions, please pay attention to install lightning protection device or cut off the power.
  • In order to get high quality video and pictures, make sure your internet connection is stable and smooth.

1. Network Settings

IPv4 address of the PC needs to be in the same network segment as the IP address of the IP camera to make it could be used normally. (Note: The default IP address of the IP Camera: 192.168.1.168.) Specific settings in window system can refer to the following methods.

Method One

Check the IPv4 address of PC: click Start / Control Panel / Network and Internet / Network and Sharing Center / Local Network / Details.

Local Area Connection Status — click Details buttonNetwork Connection Details showing current IPv4 address highlighted

Set the PC IPv4 address (e.g. PC: 192.168.1.165). Open Local Area Connection Status, click Properties, then set Internet Protocol Version 4 (TCP/IPv4) Properties to an address in the same subnet as the camera.

Local Area Connection Status dialog with Properties button highlightedTCP/IPv4 Properties set to IP address 192.168.1.165

Or add PC and network cameras in a same network segment (e.g. 192.168.1.165). Open Advanced TCP/IP Settings and add the additional IP address in the same subnet.

TCP/IPv4 Properties showing existing address 172.18.195.112Advanced TCP/IP Settings with 192.168.1.165 added to IP addresses list

The IPv4 address can not be conflicted when you add in LAN.

Method Two

Use IP search tool 6.1.4.2 or above version, changing searched IP camera to the same network segment as the PC's. (Note: Default IP address of the IP Camera: 192.168.1.168. Default Username: admin, default password: admin; the changed URL can not conflict with the IP address of other devices in the LAN.)

IP Search tool — Device Search list with Network Param panel for changing camera IP

2. Ping Device Address

Connect camera and PC by network cable in the same LAN, power on. Connecting as following (PoE switch, camera, PC connection):

Network topology diagram: IP camera connected through WAN switch to PC

Left click window Start menu, input "cmd" in Program/file searcher to open window command (or you can press shortcut "win+R" directly on keyboard to input "cmd"). From the cursor blinking side, input ping ***.***.***.*** and press "Enter" (for example, when the camera IP address is 192.168.1.168, then input ping 192.168.1.168 and press "Enter") to check the system statistical connect information. For example as below photo, when system statistical connect information is data package: sent=4, received=4, loss=0, <0% loss> means PC and camera signal communication is normal; you can login the camera by webpage.

Command Prompt showing successful ping to 192.168.1.168 — 4 sent, 4 received, 0% loss

3. Connection and Login

Please download and install OCX plugin when the first time you connect to the camera. Open IP Search search icon tool and click Search, double click the camera you need to connect; a webpage of login will come out, then click Download to download the OCX plugin and install. After installation, please click to refresh the webpage and input user and password. (Default Factory setting user is admin, default password is admin; we strongly suggest you to change the user and password to higher safety level.) Details are shown as below photos.

IP Search tool — Device Search list showing camera to double-click for web login (3-1) Web login page showing Notice to download OCX plugin with Download button (3-2) HsWebPlugin Setup Wizard completing installation — click Finish (3-3) Web login page — enter username and password then click Login (3-4)

4. Real-time Preview and Parameter Configuration

Enter the username and password of the device in the browser user interface to enter the real-time preview interface.

Browser real-time preview interface showing live camera feed with toolbar

Click Configuration to enter the device and other functions, including local configuration, system, local network, video, image, and event configuration. Users can selectively set these features to achieve better performance based on the actual situation of the application scenario.

Configuration page showing Video settings with stream type, codec, and bitrate options

5. Add Device

Before adding a device, please confirm that the IP address of the NVR and the device are in the same network segment and do not conflict.

Click Camera under the NVR main menu to enter the menu and click Add.

NVR main menu with Camera option highlighted (5-1)

The Camera Management screen opens showing the current channel list. Click Add at the bottom.

Camera Management screen listing added channels with Add button highlighted (5-2)

In the Device Search dialog, tick the device to be added and click Add, then click Cancel to complete the addition.

Device Search dialog showing discovered cameras; tick a device then click Add and Cancel (5-3)

The added camera now appears in the NVR preview. Under the NVR main menu you can also set Recording, Playback, Motion Detection, coding parameters, and other operations.

NVR multi-channel live preview showing CH2 highway feed and other channels (5-4)

6. BitVision Download

Download and install BitVision on your smartphone by the following way.

  1. In the Android phone Google App Store or iPhone App Store, enter "BitVision" search, download and install.
  2. Scan the following QR codes to download and install the App.
QR code to download BitVision for Android

Android

QR code to download BitVision for iOS

iOS

  1. Download from the following website:

Android App download address: https://play.google.com/store/apps/details?id=com.gzch.lsplat.bitdog

iOS App download address: https://itunes.apple.com/app/id1419463554

7. Add Device on BitVision App

Open the BitVision App (new users please register an account first), then follow these steps to add devices.

Click Device manage in the menu bar.

BitVision sliding menu with Device manage option highlighted (①)

Click the red red plus button button at the bottom of the Device manage screen.

Device manage screen showing device list with red + button at bottom-left (②)

Click Add device icon Add device.

Device manage screen with Add device option highlighted (③)

Click SN Add.

Add device menu with SN Add option highlighted (④)

Scan the QR Code printed on the device sticker or posted on the P2P interface.

Scan the serial number screen with QR scan box (⑤)

Enter the device username, password and Captcha (printed on the label), then click Submit.

Add device form with S/N, Account, Password and Captcha fields and Submit button (⑥)

Click Please set the device name, enter the device name, click Done; click Please choose a group, choose the camera group, click Done, then click Finish.

Add setting screen showing Device name and Group fields with Finish button (⑦)

The device is successfully added to the device list.

Device manage list showing newly added devices with checkboxes ticked and Done button (⑧)

8. Preview on BitVision App

Click on the right part of the sliding menu to enter the main interface. The Real time tab is shown on the home screen.

BitVision Real time tab showing empty channel grid ready for device selection (①)

Click Real time, then click the gear / channel selector icon to enter the Device manage interface and choose the device channel you want to preview; click Done.

Start to play the real-time video.

BitVision Real time tab showing live multi-camera feeds from added devices (④)

Table of Contents

Statement
Safety Precautions
1. Network Settings
Method One
Method Two
2. Ping Device Address
3. Connection and Login
4. Real-time Preview and Parameter Configuration
5. Add Device
6. BitVision Download
7. Add Device on BitVision App
8. Preview on BitVision App